Cal Flame B-200 Instructions d'exploitation télécharger pdf (Page 12)

4-8

Safety and Operating inStructiOnS

0056-1351

Figure 3: Setup with Dual Torch Mount

B. Optional Dual Torch Setup

Set up the optional dual torch mount assembly, Part No. 0252-0136, as shown in Figure 3.

Install the dual torch mount plate (1) on the machine housing in place of the single torch mount

post supplied with the standard machine package. Attach the removed single torch mount post,

along with the second one (supplied with the dual torch mount assembly), at the ends of the

dual torch mount plate.

Install the rack handle assembly (2) (supplied with the dual torch mount assembly) on one

of the torch mount posts and install the rack handle assembly from the single torch mount

assembly on the other torch mount post (3). Then install the two torch holders (4) on their

respective racking bar assemblies and torches as explained in Section 4.01. Use the Y-ﬁttings

(5) furnished with the dual torch mount assembly to make the necessary dual connections at

the gas manifold accommodate the additional cutting torch.

Machine Operation

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Pas de commentaire

Cal Flame B-200 Instructions d'exploitation Page 12