Cal Flame B-200 Instructions d'exploitation télécharger pdf (Page 20)

5-16

Safety and Operating inStructiOnS

0056-1351

SPEED

ADJUSTING

SHAFT

MOTOR

DISK

ASSEMBLY

CLUTCH

YOKE

ASSEMBLY

CLUTCH

SHAFT

CONE DISK

ASSEMBLY

OUTPUT

DISK

ASSEMBLY

WORM SHAFT

ASSEMBLY

TRANSFER

SHAFT

ASSEMBLY

REAR

AXLE

DRIVE

GEAR

CLUTCH

DOG

THROW-OUT

LEVER

Figure 6: VCM-200/VCM-200HT/VCM-200HS Internal Assemblies

5.04 DRIVE CLUTCH ADJUSTMENT

Turn the machine upside down; remove the two casters and the bottom cover to access the

clutch. Operate the clutch a few times by moving the clutch lever from FREE to DRIVE and observe

how the "over-center" action disengages the clutch. With the clutch lever in the DRIVE position,

the end of the lever should have about ¼-inch movement for ideal freeplay. This is necessary

to assure that the clutch will fully engage and have enough travel for disengagement.

Adjust the clutch freeplay by the following steps:

1. Place the clutch in DRIVE position.

2. Rotate the drive wheels by hand to assure that the clutch teeth are fully engaged.

3. Loosen the screw in the throw-out lever and rotate the throw-out lever until it presses

against the cam on the clutch shaft.

Machine Maintenance

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Cal Flame B-200 Instructions d'exploitation Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Barbecues et grillades Cal Flame B-200